Creality Falcon converted Ender 3 - Reversed X Axis

[s3sebastian]

Yes, and for the print bed direction, you could adjust the Y axis which is the 2nd bit.

Bed Quordinates

Open the console in LightBurn or LaserGRBL. Check current configuration with $. Find $3, which controls axis direction: 1 inverts X-axis (binary 00000001). 2 inverts Y-axis (binary 00000010). 4 inverts Z-axis (binary 00000100). To invert the Y-axis: If $3=0, type $3=2 to invert only the Y-axis. If $3 has another value (e.g., $3=1 for X-axis inverted), add 2 to invert Y too. For example, $3=1 becomes $3=3 to invert both X and Y. Send the command (e.g., $3=2) to apply the change…

You probably want to set the value to 3 then.