Ender 3 v3 KE auto leveling test failing

Hello, I am just finishing up a hot end and CR Touch swap after a meltdown/filament explosion. I have gotten everything all put back in place, none of the pins in the connectors are bent, and all of the connections are in the correct spots. Everything is hooked up correctly and this is not the first time I have printed with this printer. However, when I try to do the self test/auto leveling, the print head moves to the left to the stops and keeps trying to move. It then gives me a couple of codes, 2022 and abnormal print head. I don’t know what I am doing wrong, since the only thing I changed was the hot end and the CR Touch. Here is a video of what is going on:

Any help would be appreciated, TIA

That is not tripping the limit switch. Check if the switch is still working. Might need a new switch, bit of soldering, or a new hotend board (aliexpress has them)

That is what I though it was, would you happen to have a link to the board since the limit switch is soldered in?

I have posted a link to it on here before but for now I can’t find it on Aliexpress. Think its v3ke PCBA. I shall keep looking.

Here it is Pete

You sir, are amazing, thank you very much.