K1C Sleep mode / Buzzer?

[Bill.b]

I use a TPLink wifi power switch to switch of my K1C printer approximately 4 min after completion of a print. Refer to the following link.

Does Anyone Know if the K1 Max can turn itself off after printing?

You can use a wifi power plug such as TPlink. You will have to root your K1 and install moonraker to set a macro to control the tplink plug. in moonraker.conf add [power printer] type: tplink_smartplug address: 192.168.0.172 'insert the IP address of the tplink plug restart_klipper_when_powered: True restart_delay: 3 port: 9999 in gcode_macro_cfg ADD [gcode_macro POWER_OFF_PRINTER] gcode: {action_call_remote_method(“set_device_power”, device=“printer”, state=“off”)} [delayed_gc…

Bill