From the picture belongs to the print midway plug, extrusion is not enough 1, check whether the normal rotation of the axial fan of the nozzle 2, printing in the extrusion motor is normal rotation 3, tighten the extrusion clamp screw, increase the extrusion pressure 4, check whether the extrusion clip is broken

hi, Daniel,from your image, maybe the problem is the leveling too high, so the filaments are not easy to stick on the platform. you can try to relevel it, just like this

The most straight-forward way is to put your sliced G-code files on an SD card, insert it into the printer and use the LCD to start the print from the printer.