Creality New 3D Printer CR-200B
@3D-McGeiger Hi, did you solve it? I have the same problem.
![alt text](image url)https://drive.google.com/file/d/1gxcbjMaLIRMlXQ6BE0NcChib2124pZYI/view?usp=sharing
Hello admin, Hello Creality,
I have tried to update my CR-200B to FW-Version 1.0.4 and it failed to the exetent that I have lost my ability to use the touch screen.
Tried to resurrect it by flashing the firmware again with 1.0.3 and it did not work, the Firmware does not get loaded after powering on the CR200.
I have watched the Creality video for the FW-Update and came to recognize that in this video you are using a HEX file, which differs from the downloaded BIN File.
I am running a V4.2.5 Mainboard, number on the back of the printer is: P202J12G10099.
I will include pictures too.
Any chance I can get help here?
Could you provide a video that we can check the issues? Thank you
A query regarding CREALITY CR-200B.
I have a problem in it. When the power is on, it is working normally but when the power is down the bed is floating downwards and after the power is on, the bed is not returning to its place, so that the print is floating. Could you please tell me how to rectify this defect.
uncheck Origin at center, then your print will be placed as you position it in the slicer.
@admin Hello, I just got the printer and for some reason it's not printing in the center of the build plate - it prints a little to the left and down. I'm using the Creality 4.8 version of the slicer program. But when I print one of the samples that came with the printer, it prints perfectly. I have read on different forums that others are having the same problem. Can you please let me know why this is happening? Thanks.
My printer is working fine after some upgrades.
If your CR-200B doesn't work well, could you please send me the serial number, that we can check which batch of the machines are and give you the best professional after-sales service. Thank you for supporting .
for CURA I recomend to download Creality slicer-4.8.0:
https://www.creality.com/download --> Software (it's in Portuguese language, but you can change it to eng). Creality slicer is re-branded CURA software.
From there you can export/rewrite setings to CURA.
About the issues with jamed filament/underextrusion/.. please check these:
maybe you have the same issue.
I have bought this printer also but i need the CURA settings that are best for this printer .
Did you already have your printer setup?
Mine doesn't work well , i hope due printer settings....
Filament is often jamed and bigger surfaces sometimes not even filled.
If you have a solution already i would like to hear from you.
Hi , you have to unmark the "Origin at center" Value
Did you find correct settings? This printer in on they way to my home, but it's little bit scary now. Forum with 2 topics only, both issues and no reply from Creality...
I need the proper settings to load into Ultimaker Cura for this printer.
Nothing I do will make it print in the center.
X - 200
Y - 200
Z - 200
Build plate - Rectangular
Origin at center - X
Heated bed - X
Gcode Flavor - Marlin
X min - -20
Y min - -10
X max - 10
Y max - 10
Gantry Height - 200mm
Number of extruders - 1
M82 ;absolute extrusion mode
M201 X500.00 Y500.00 Z100.00 E5000.00 ;Setup machine max acceleration
M203 X500.00 Y500.00 Z10.00 E50.00 ;Setup machine max feedrate
M204 P500.00 R1000.00 T500.00 ;Setup Print/Retract/Travel acceleration
M205 X8.00 Y8.00 Z0.40 E5.00 ;Setup Jerk
M220 S100 ;Reset Feedrate
M221 S100 ;Reset Flowrate
G92 E0 ;Reset Extruder
G91 ;Relative positioning
G1 E-1 F300 ;Retract a bit
G1 E-1 Z0.2 F2400 ;Retract and raise Z
G1 X5 Y5 F3000 ;Wipe out
G1 Z10 ;Raise Z more
G90 ;Absolute positioning
G1 X0 Y0 ;Present print
M104 S0 ;Turn-off hotend
M106 S0 ;Turn-off fan
M107 ;Turn-off fan
M140 S0 ;Turn-off bed
M84 X Y E ;Disable all steppers but Z
M82 ;absolute extrusion mode used to override G91
Nozzle - 0.4mm
Com Mat Dia - 1.75