Half screen on the LCD print area

  • Currently i can only print on the top half of the build area. tried a brand new LCD, cleaned the connector, seemed to work, but halfway through the print the lower half of the screen is blanked out

    alt text

    when i do a calibration i can only see the top half of the rectangle.

  • Hi there, I had exactly the same issue and managed to fix it quite simply...
    Just open the side panel and check the cables connecting on the board, there is a bigger grey one for the front screen and a thinner black one for the printing screen. Make sure the black cable is in its socket correctly and stick it down with some duct tape just to be sure.
    Hope that solves your issue.

Log in to reply