Mesh bed leveling
-
Please enable this in the firmware.
-
I've installed the BLTouch on my Ender 3 V2 and enabled UBL and I get a nice mesh bed leveling experience. It can't be done from the LCD, but you can go through the steps in the Marlinfw.org documentation on the UBL and it'll work just fine.
-
@admin Any news from your engineering department ? They should not introduce a new screen on the V2 and not provide the support.
-
@snoozy
Marlin are working on a version of the Dwin for the E3V2 but it is still in early development.
-
@admin Yes Pllllease !
-
Dear @snoozy
Thanks for your suggestion, I have sent it to our engineer, and see if we can make it happened.
-
Hi, since a lot people have issues with bended glass bed, please bring us some help.
My bed is bend in the middle, so that I can get the corners leveled, but never the middle.
What we need is manual mesh leveling as it is provided by the marlin firmware.
The problem is, that marlin does not support the ender 3 V2 LCD. Therefore there is no way to use the manual mesh leveling, because we can't change the menu.
What you can do:
- Add manual mesh bed leveling to the stock firmware
- Provide the code for the LCD for being used in marlin
Thank you so much
-
Do you want to change the screen firmware? Please use the firmware provided by Creality. If the firmware is not our company, the warranty will be lost. The bl-touch firmware of Ender 3v2:
-
@admin Yes please Add Mesh Bed leveling to Ender 3V2. I can compile it now in Marlin 2.0bugfix,but no menu option. I am being told the screen firmware can not be easily updated and public domain per say so we can change it. Please add it, replace "Info Icon" with Bed Leveling, please! Please, Please... I can not wait for this feature.
-
Hi @Grump, which model are you using now?