How to unbrick your Creality Box
-
This post is deleted!
-
This post is deleted!
-
It seemed to have worked for me, you have to use a paperclip to get the box into Loadng mode, hold it for at least 6 seconds AFTER plugging in your USB with the software on it. You will have to wait for it to update for at least 3 cycles, te gren light will go off twice, then stay on indicating a properly flashed box. You also have to have a blank MicroSD in it to load he firmware onto. Russ
-
welcome to me in the box, after the update, the wifi does not work at all, the green LED is not on, only the blue and yellow LEDs work, but the box is ofiline and I can not connect it to the network, how to fix this problem uploading the software does not work, the green LED lights up for a moment and then the box passes in normal mode, only the yellow LED is lit.
-
Please, same problem, no flash light
-
@Mike281 Hi, sorry to hear that you are having an issue with our app. If you are on WhatsApp please send us a message at +8619925422890 or simply drop us an email at teamcloud@creality.com. We would love to help and learn more!
-
Hello, don't work for me.
-
-
-
@admin Don't work, any ideas? After this procedure only is yellow led light on
-
That link does not work, can you update it?