CR-5 Pro Problema Impresión TPU Flexible
-
Hi there,
I have a major problem when printing Flexible TPU on the CR-5 Pro, it always gets stuck in the extruder, I have tried a thousand settings:
- Speed 20mm / s
- Flow 105% / 110% / etc ..
- More temperature in Nozzle 210-230
- Loosen the extruder screw to avoid pressure on the material
- Change different Flexible TPU material up to 3 times
And without a solution ...
Any ideas? .. in the advertising it clearly indicates TPU and I see that this extruder IS NOT PREPARED FOR TPU.
Thank you.
====================================
Hola,
Tengo un importante problema al imprimir TPU Flexible en la CR-5 Pro, se atasca siempre en el extrusor, he probado mil configuraciones:
- Velocidad 20mm/s
- Flujo 105% / 110% / etc..
- Más temperatura en Nozzle 210-230
- Aflojar el tornillo del extrusor para evitar la presión sobre el material
- Cambiar hasta 3 veces de material TPU Flexible distinto
Y sin solución...
Alguna idea?.. en la publicidad indica claramente TPU y veo que este extrusor NO ESTÁ PREPARADO PARA TPU.
Gracias.