No USB or SD Card......
-
I recieved my CR-6 yesterday and assembled in but it did not come with the tool bag, a USB or the SD card. My understanding is that the slicer software and settings are on that SD card.
-
Yes there is a drawer in the right front part of the printer. Totally missed this too...wasn't until I went to online review page that showed picture. I ended up downloading software from website that did not have printer profile and made some pretty crappy prints. All is better now that I'm using software from the SD card. Agree should be more obvious in manual.
-
Dear @Kenny_Rogers_13 @djanitor, Thanks for your suggestions, this is our new design, and we have it in our product landing page, if you have other questions, you can check our website first, we also have some blogs for CR-6 SE. Thanks for your support.
https://www.creality.com/goods-detail/cr-6-se-3d-printer
https://www.creality.com/blog
-
@djanitor Ah, I found it. Thank you for pointing that out. I agree that there should be attention to point this out in the manual as well. It says toolbox but it doesn't say the toolbox is a drawer on the machine. I was looking for a separate pouch or something.
-
HI @Kenny_Rogers_13, it should be in the toolbox, please check it, ok? If you still can't find anything please let me know. Have a nice day.
-
@Kenny_Rogers_13 I thought the same thing, until I discovered the drawer in the printer itself on the right side front. Really should show that in the manual.