ATTENTION: Creality BL Touch Application Notice
-
Dear @dkfauth, I am confused about the dedicated port, what it means? Please give more details, thank you.
-
@admin please respond back to my question on adapter boards and dedicated port. I am running on the dedicated port. Are you saying you are not supporting the dedicated port?
-
@admin Thanks for the info! So there won't be a Firmware for using the dedicated socket on the bord without unplugging the z-stop switch?
-
@DNW Dear, V4.2.7-this is for the users who change the mainboard, then need to upgrade. And another one is for the original machine that has any changes.
-
@SlackHacky Dear, could you please send more details about the issues?
-
@ocariduc, no, it just for the BL touch use. Thank you.
-
@ocariduc Dear, it is in the download platform. I have checked. Thank you.
-
@admin Why does the video show that I need an adapter board for Ender 3 v2 when we have a dedicated port. In addition the cables shown in your forum https://forum.creality.com/topic/139/why-creality-ender-3-v2-bl-touch-firmware-doesn-t-officially-release-yet are not the same cable ends that came with my bltouch. Please clarify.
-
If I don't have the BL Touch, can I still upgrade from Firmware V1.0.1 to this V1.3.1 ?
Since both versions are based on Marlin 2.0.1, are there any changes besides support for the BL Touch ?
Thank you
-
@SlackHacky
Got it working on the 4.2.2 motherboard but only after reconnecting through adapter and Z socket.
Would not work connected to BLTouch socket. I had to swap red and blue cable in plug back to original order before I connected it up.
-
@admin The pdf file for this version of firmware has been removed !
-
@admin does not work for ender 3 v2 v4.2.2 and v4.2.7 - i'm NOT only person to say this
-
@DNW TMC2225 for v4.2.7 board and other for v4.2.2
the 1.3.1 BLTouch (at moment) does NOT Work on either board - i have personally test on my own v4.2.7 E3V2 others have tried on v4.2.2 E3V2 - i do have a working bltouch firmware i compiled from bugfix206 so i know its not a faultly bltouch as has been on both my v4.2.2 and v4.2.7 board (both boards fully working )
-
@admin said in ATTENTION: Creality BL Touch Application Notice:
Ender-3 V2-Marlin-2.0.1 - V1.3.1 - BLTouch.bin
Ender-3 V2-Marlin-2.0.1 - V1.3.1 - BLTouch - TMC2225.binCan you please explain the difference between those files? (Is there also a TMC2225 board, thought these were TMC2208 on the new 4.2.2 and 4.2.7 boards?)
PS: Will there be an official firmware, that is using the dedicated BLTouch connector on the new boards? Just saw in the video, that it is not used with this firmware.
So if I have wired my BLTouch like you described before it won't work?
(https://forum.creality.com/topic/139/why-creality-ender-3-v2-bl-touch-firmware-doesn-t-officially-release-yet)Thanks in advance!
-
@admin BL TOUCH INTRODUCTION
https://www.creality.com/download/32