CR-6 SE can't read storage card
-
I have just received my printer and it can't read the storage card, I tried with 3 different cards included the OEM 8 gb storage card come with the printer, but no one is work.
-
I too have the same issue and it just started today. It was working at the first week when I just received the printer. One of sudden, the SD card reader is not reading any SD card.
I tried about 4-5 different SD cards and none of them show the files in the print menu but they were working before. I also tried reinsert the SD cards a few time but the on board SD card reader will not read and display any gcode files.
-
OK, I think I resolved the issue I was experiencing. Try the following...
- Backup all the bundled in the SD card into your PC.
- Format the SD card using FAT32.
- Copy only the model files into the root folder: copy *.gcode files in BACKUP\4.Model\ into SDCARD:\
This time the printer should be able to read the files saved into the SD card.
-
Having the same issue here. First tried the SD card bundled with the printer, then I tried using a different SD card, reformatting the card. The printer behaves the same way as if no card was inserted.