Unable to level Ender 5 plus
-
-
Check whether the slicing software is Creality.
-
Whether the forming size is inconsistent with the actual size when slicing, try to format the memory and slice it again
-
Please update the latest firmware
https://youtu.be/0rKfgOZAU-Y -
If the problem cannot be solved, please send an email to cs@creality.com. There will be professionals to help you.
-
-
Just to keep you updated, I have also replace the board now, with a silent board.
-
I also wish to point out that it repeatedly happened that the printer "forgets" its position and tries to move beyond the limits
-
Hi @Yolanda, thank you for your response. That leveling procedure is what I did, literally the whole weekend. The result is ok-ish at first but it gets worse again after short time.
-
hi，@MrE10 You can refer to this video for leveling
https://youtu.be/NBatdrVr-mM
-
So I try it again with image urls
I've also made 3 autoleveling runs after another. Not turning any screws:
Looks like quite big differences to me
-
@SteveDee The files are 505 and 508Kb and when I try to upload them I get: Expected integer between 1 and 100 for quality but received 1000 of type number
thanks anyways
-
@MrE10 ...per file
-
@SteveDee Per file or all files together?
-
@MrE10 You need to limit image files to less than about 800kb or they won't upload.
Also, make sure you use this button:-
-
The printer just managed to drive beyond Y, Z and probably X axis max points...
 I executed "Measuring" from the leveling menu, then started a print job. Then this happened.
-
- What's the difference bitween the measuring process that I can't start in the menu and the one it does automatically before the print job? Do I need to do both?
this should be: What's the difference bitween the measuring process that I can start in the menu and the one it does automatically before the print job? Do I need to do both?
