What should pay attention to for the first printing?



  • What should pay attention to for the first printing?

    1.Make sure the wires and cables are connected correctly.

    2.If you are new to use the Creality slicer, Cura or any other slicing software, remember that the setting of temperature, brim and printing speed will help improve printing quality. If the first layer of the model has less contact surface with the hot bed, the brim does help to stick on the hot bed.

    3.Take time to level the build plate. Generally, if you have leveled successfully at the first time, then you don’t have to level again at the second printing, except the movements and jolts.

    Do you have any suggestions? Please share with us!



  • The printing speed of the first layer is not too fast, best between 20~30mm/s. it's easy to stick on the hot bed, and avoid warping.


Log in to reply
 

Copyright © 2020 Shenzhen Creality 3D Technology Co., Ltd All Rights Reserved.