CR-6 SE | Touchscreen display malfunction after firmware upgrade



  • Hello!

    I first upgrade the touchscreen firmware and all went good. Later with the motherboard upgrade i couldn't make it happen. And i dont know why, i try to falsh de touchcreeen again (?) and after that the display started to malfunctioning has it showed in the pictures below.

    After that, i could flash the motherboard correctly and the touchscreen, but the display keeps showing incorrectly. With low brightness and the screen moved up. I didn't find any similar issue like this.

    I dont know if i messed up the display/motherboard of the touchscreen.. i should get anotherone o there is a solution?

    The motherboard is the v1.1-ERA and the display/touchscreen is the stock one.

    Thanks

    Pictures:

    e78dde33-66d5-409a-8e57-3df163f000f9.jpg

    4a65f6f3-42a6-4e3a-8a3b-d74e41c46b33.jpg


Log in to reply
 

Copyright © 2020 Shenzhen Creality 3D Technology Co., Ltd All Rights Reserved.