Weird noise when turn on CR-6 SE
-
I got weird noise when i turn on CR-6 SE. After a while it gone by itself. Does anyone experience this trouble ?
-
I have this exact same problem.
It makes a loud grinding noise from the head when I turn the printer on, but it stops after about 30 seconds.
It only happens if the printer is cold. If I turn it on and it is still warm from a previous operation, there is no noise.
-
@neok23 my guess weird noise that goes away is you got one of the bad part cooling fans. I replaced my one as the stock ones don't seem to be reliable.
-
@fery I also received this on my printer coming from just below where you plug the SD card in. Mine is the fan coming up to speed (something in there is loose), and it happens every time I have it off for a period of time before turning it on.
-
What does it sound like. I get a loud fan noise at the beginning but goes away after 30 seconds or so.
-
Dear @fery
Please check whether the wiring between the motherboard and the print head is loose. If you still have the same problem, please provide a video.