CR-6 SE G-Code Script



  • I just received my CR-6 and it has a card in it that says that the if I use a slicer other then Creality slicer ( I use Simplify3D) .. I need to change the G-code script. The card had a g_code of :

    M201 X500.00 Y500.00 Z100.00 E500
    M203 X500.00 Y500.00 Z10.00 E50.0
    M204 P500.00 R1000.00 T500.00 ;Se
    M205 X8.00 Y8.00 Z0.40 E5.00 ;Set
    M220 S100 ;Reset Feedrate
    M221 S100 ;Reset Flowrate

    G28

    G92 E0 ;Reset Extruder
    G1 Z 2.0 F3000 ;Move Z axis up
    G1 X10.1 Y20 Z0.28 F5000.0 ;Move
    G1 X10.1 Y200.0 Z0.25 F1500.0 E15
    G1 X10.4 Y200.0 Z0.28 F5000.0 ;M
    G1 X10.4 Y20 Z0.28 F1500.0 E30 ;D
    G92 E0 ;Reset Extruder
    G1 Z2.0 F3000 ;Move Z Axis Up

    but it feels like its missing parts and ... I am not sure what is it missing.
    also... what base profile would people recommend using... I have heard use the ender 3 or Cr 5 profiles.
    any help would be appreciated.





  • Dear @dgevanson

    Please download it and use this slicer firmware. Thank you.
    7c0060fe-ed1d-4587-9ab6-90f06da5764d-image.png


Log in to reply
 

Copyright © 2020 Shenzhen Creality 3D Technology Co., Ltd All Rights Reserved.