CR-6 SE After-sales tutorial video

[admin]

Dear All,
We organize all related videos into a collection so that everyone can find the right one and solve problems.

CR-6 SE unpacking operation English version 0623： https://youtu.be/J6UDlXrfv-4
How to check the CR-6 SE motor does not work (Chinese and English)： https://youtu.be/57q43doOqA4
How to check CR-6 SE extrusion springback tutorial (Chinese and English)：https://youtu.be/7PkuFt1PJkI
CR-6 SE heating restart inspection tutorial：https://youtu.be/yYL8DUsHS98
CR-6 SE Booting No Response Checking Tutorial：https://youtu.be/jQF2bQDStXc
CR-6 SE boot screen does not light up inspection tutorial：https://youtu.be/MLrSUzVtsAM
How to check the CR-6 SE nozzle without heating tutorial (Chinese and English)：https://youtu.be/oKdanIJWFOA
CR-6 SE adjusts the X-axis level tutorial (Chinese and English)：https://youtu.be/MUmqPfcxLv0
CR-6 SE cleaning nozzle Heatbreak tutorial (Chinese and English)：https://youtu.be/SVqFEmMpHwU
CR-6 SE needle cleaning and nozzle replacement tutorial (Chinese and English)：https://youtu.be/CHZMgMCw68U
CR-6 SE Extrusion Mechanism Replacement Tutorial (Chinese and English)：https://youtu.be/WSBrzfEQwVg
CR-6 SE replacement print nozzle module English version：https://youtu.be/e-S9NJrXL80
CR-6 SE replacement nozzle kit tutorial (Chinese and English)：https://youtu.be/nHAo_39aEbA
CR-6 SE replacement pressure-sensitive kit tutorial (Chinese and English)：https://youtu.be/QB0P2opolqA
How to update the motherboard firmware for CR-6 SE (8-bit chip)：https://youtu.be/dxggdc2Bqp0
CR-6 SE firmware brush tutorial 32-bit chip STM32F103：https://youtu.be/5JAwU00jH4k
How to flash the motherboard firmware for CR-6 SEL::https://youtu.be/giLGRq7UM2k
CR-6 SE upgrade and replace the 32-bit motherboard to detect the English version.：https://youtu.be/5B1WloCW0O4

[gromar88]

@HVJ17
+1 I agree, faulty power switches should be replaced by sending new ones by Creality team.

[HVJ17]

@hansamann the folder needs to be the only thing on the sd card.

[hansamann]

I am still failing to upgrade the screen firmware. The video speaks of the "dwin-set" file - does that mean the compressed ZIP file needs to be in the root of the sd card or the uncompressed "dwin-set folder"?

[HVJ17]

If you are done with all those working power switches, can you send few out to people who backed you on KICKSTARTER?

Please?