@auzzyboy anything on this? I want to create recorded footage or timelapses using my creality box but figure out how to?
Best posts made by auzzyboy
Latest posts made by auzzyboy
Creality timelapse with Creality box?
Hey, so I plugged in my creality box, connected to Wi-Fi, connected camera and everything is working great! can even access it via mobile data whenever & wherever iam which is amazing! Curious to how i recorded time lapses though? I have an SD card inserted which the box can read but i cant find any button/option to capture a recording?
Creality slicer - Different speeds at different layers?
Hi, Is their any way to alter the speed (%) at different layers heights within the slicer? Say for example I had a large print that had a small detailed form on the top is their a way to print at a set speed but then have the printer reduce to 60-70% at a set layer (for the smaller detailed part of the print)?
Would be great this way i could hit go and walk away, currently i have to remember to keep an eye on it and alter it manually via the LCD display or by altering the G-code. I cant find an 'add on script' or plug in that is capable of performing this task?
RE: How to remove slight corner warping
@billbyrd just bits and bats. Some structural parts and some gimmicky stuff like thors hammer etc ha.
The strange thing is that it does it randomly? It doesn't happen evertime but thier is nothing I am changing between prints - I have ran a same print several times and I seem to get different results each time?
I use the Ender 3 max. I have properly calibrated it with an engineers square and using measuring equipment so all the structural parts are aligned. I have also tried different software settings for the first layer like not running the part fans or altering the Z height but I simply can't seem to get rid of the random warping?!
How to remove slight corner warping
Had this issue for a while now and I'm struggling to figure out what the problem is?
I have treid differnet temps, flows etc. My nozzle is the perfect height and my bed as flat as it will go using a dti. I also clean my bed thoroughly before a print and I even use the occasional prit stick to help with adhesion but every couple of prints get this problem and it's driving me crazy.
Prints starting to high?
All my offsets are default/0, printer is up to date with the latest firmware, in creality slicer the object or part is sitting on the bed at z0 however when i start a print the line down the side of the bed looks fine but when it comes to print the actual model itself the nozzle sits about 4mm to high? Know why this may be happening? I'm struggling to get anything printed and its driving me crazy️