Try slowing it down the print speed to 20 mm/s. You also might want to bump up the temps to say 220 to 230. But I don't know what TPU your trying to use.
C
Posts made by Crazyheaven
-
RE: CR-6 SE PRINT WITH TPUposted in CR-6 SE /CR-6 MAX 3D Printer
-
RE: My power switch doesn't work and random freezingposted in CR-6 SE /CR-6 MAX 3D Printer
Do I need to send in a video of the issue?
-
RE: Filament changeposted in CR-6 SE /CR-6 MAX 3D Printer
To remove filament flip the switch towards the hot end. To add filament to the printer flip it away from the hotend.
-
RE: Is the power switch dead?posted in CR-6 SE /CR-6 MAX 3D Printer
Replace the switch and send them the bill for it. It isn't hard to do.
-
RE: CR-6 SE SOURCE CODE and Tutorial Video updateposted in CR-6 SE /CR-6 MAX 3D Printer
I do not see the video tutorial. Am I missing something?
-
Have my add on's shipped yetposted in CR-6 SE /CR-6 MAX 3D Printer
I was part of the group waiting on add-ons. I'd just update my existing thread but it's still waiting on approval.
Backer number 3,890
I see your sending some people e-mails with the tracking info on their add ons?
-
My power switch doesn't work and random freezingposted in CR-6 SE /CR-6 MAX 3D Printer
I can't turn the printer off. I have to unplug it to turn it off and plug it back in to turn it on. The switch does nothing at all.
My other issue is the printer sometimes freezes when attempting to autolevel at the start of a print. I have to unplug it and plug it back in to fix it.