@admin you need to change page 3 of the user manual then.
or get someone higher up with the correct info to clarify this. if no IPA then you need to send me a new bed.
Best posts made by dave
Latest posts made by dave
RE: CR6 SE Bed Won't Level - Pushes nozzle into bed at .5 Z Offset
i found when i first got the printer the shroud around the head was not quite the right shape. and it was interfering with the filament feed tube.
and this seemed to be effecting the bed level process.
Check that, if it looks a little close. add a couple of washer to move the shroud out a little.
Even if it looks like it misses it really needs 1 or 2mm of clearance.