Topics created by Decibel

@Decibel I finally received two more parts - a spare motherboard and a complete hot-end assembly. When i opened the box I found that the motherboard had been placed inside the hot-end assembly box with no packing or protection apart form its anti-static bag. Well done Creality way to go to protect electronics by placing a PCB loose in a box with a heavy hotend assembly!!!!!

Full M600 support has not been implemented in the community firmware. If you try to do anything w.r.t. parking, the print won't continue afterwards, as the controller is stuck in host print mode and the LCD is unable to send it gcode. Might work if printing from a host like OctoPrint already, but definitely not for SD printing. There is rudimentary pause support in the comminty FW, but from what I've heard form other users I do believe M25 works in the official firmware as well (haven't checked, though, haven't run the official firmware for more than two or three prints and am now on the BTT board, so can't even test)

Dear @Decibel For your add on parts, we will be shipped to you separately. The power switch and motherboard, we will send a replacement after checking it is true bad one. There should be provided pictures and video to kickstartersupport@creality.com We will update the firmware to the website, thanks for your suggestion.