Posts made by drw

Does it work?

drw

Is this working? I made a post several days ago and it never appeared. I also don't see new posts for several days either.

Unboxing and assembling printer now and I see that the Y-axis rollers are not adjusted to rails so the whole bed assembly is loose. I managed to gain access to the socket head screws for the roller eccentrics by pulling the drawer enclosure forward. You need to do this with the screen off the machine because the enclosure is retained by the screen mount. I've got it together now and am going to continue setup and testing. I was mostly curious if mine was a rare case or if others have found the rollers not adjusted. So far the X and Z axis seem fine.