Dear friends, Creality Cloud invites you to design the moon lamp with the built-in Planet Lamp Maker.

The contest runs from Aug 6th, 2021 to Aug 30, 2021, 23:59 UTC.
Contest Rules:

1. Post any photos, videos, or anything about moon lamp making, printing, tutorials, and even your real-life moon lamp print in the "Planet Lamp Maker" section on the Creality Cloud app.
2. Invite as many of your friends as possible to "like" your posts.
3. We will select the top three users in the number of likes and send cash rewards of 50$, 30$, 15$, respectively.

You can click this link to learn more details information and participate in this activity.
https://www.crealitycloud.com/post-detail/3789
Good luck and have fun!

That's a good opportunity to learn about Creality and 3D printing.

Bed adhesion is a common problem for 3D printing. Low bed adhesion would lead to curled, shifted， and potentially disastrous results, which make it difficult to properly print successive layers.

So, how to solve it?
1.Bed leveling

2.Adjust the distance between the nozzle and the build platform. The optimum distance is 0.1 mm. That is the thickness of a piece of A4 paper.

3.Decrease printing speed of the first layer
Adjust the bottom printing speed value to 20mm/s in Creality slicer.

4.Increase nozzle and bed temperature
The recommended nozzle temperature for PLA is 190-210℃，ABS is 240℃
Bed temperature for PLA is 40-50℃，ABS is 90~110℃

5.Use bed adhesive
Bed adhesive like glue, hairspray, and masking tape are useful.
Importantly, you just need to apply a thin layer of bed adhesive evenly on the platform.

6.Use brim &raft
Brim and raft expand the contact surface with the build plate. More contact surface would increase bed adhesion.
You can set brim or raft in the slicer.

Friends, If you have more solutions on bed adhesion, welcome to share it.

Dear friends, Ender-2 Pro is coming with 7 User-friendly Designs. It is great for a beginner for 3d printer.

It has some cool features as below:

1. Just 4-step assembly, easy to install.
2. As light as 4.65kg, along with a cantilever structure, so it is very portable.
3. Extra Z-axis fixed block, making it stable
   

@C3DS said in Join Creality Back to School Giveaway!:

I am printing a bunch of TPU finger grips and charger saver caps for the Apple Pen to give to teachers and classmates with ipads / Apple Pens. so far everybody loves them.

It's a great gift for teachers and classmates. I really love this, Actually, I also have a Ipad Pen, but I just put it in the drawer. I'm sure I also need this to hold my pen. Nice and practical gift.

Hi,@bill345 The default firmware is v1.0.2, and v1.1.2 is the firmware compatible with BLTouch and filament break detection switch. If the corresponding accessories are added, then you need to update to the matching firmware.

Hi, @DpDx Did you send a email to the correct mailbox?You can feedback your issues to the customer service center, please send an E-mail to cs@creality.com attached SN code, fault condition, order screenshot and purchase link.
Please confirm the email again: cs@creality.com

Dear friends. I know that many of you are very concerned about some parameter settings on slicer.
This parameter setting can only be used for Creality filaments

@Yolanda nice

Dear friends,
Creality has uploaded the latest firmware of CR-10 smart in the official website (https://www.creality.com/download). The leveling-free issues and the progress bar at 99% after printing issues and back to zero issues are fixed by the new firmware.

If you need it, please check and download it. Thanks.

@jmherrerias said in Replacement for CR10 S4 TOUCHSCREEN:

Does anybody know the difference between MKS TFT32_L and MKS TFT32 without the "_L"?

Where is the label of MKS TFT32_L , could you take a picture of it?

Hi, @mrgimmeone Have you flashed the correct firmware? please flash this firmware again.
Ender-3 Max - V1.0.1.6 - BLTouch without Pin board.bin
If there is still a problem, You can send an email to cs@creality.com and attach a video showing the problem.There will be professionals to help you.

@thecbrguy

1. Different printer has different situations when flashing firmware. It has a lot of contingency. There are also many people who flashed the firmware successfully.
2. Here is the firmware for CR-touch and touch screen.
   Ender - Touch Screen - HW - 4.2.7 - BLTouch.bin
3. Ender-3 V2 has no firmware for Z-axis heightening, so it does not support the modification of Z-axis heightening.

Hi, @bbroyles86 Every printer must have a port to connect it, so long as it is connected, it can print online. It means that if you want 6 printers to work at the same time, then you need 6 USB to connect the computer and 6 printer respectively.

but we don't recommend you to do this, It is likely to cause problems. The design of printer is one-on-one, that is to say, one computer can be connected to one printer.

The Ender-2 pro also has a beautiful appearance, the red color makes the printer full of vitality.

Hi, @CeeFee
There are some sliced model in this link, you can download.
https://drive.google.com/drive/folders/1XEjuATGcVbxxG95zTLKp_qgWR4c4jNyp
If you want more models, you should slice them yourself.
Here is the video tutorial on slicing :https://www.youtube.com/watch?v=pEO8Yy0gubA

Dear friends, Ender-2 Pro is coming with 7 User-friendly Designs. It is great for a beginner for 3d printer.

It has some cool features as below:

1. Just 4-step assembly, easy to install.
2. As light as 4.65kg, along with a cantilever structure, so it is very portable.
3. Extra Z-axis fixed block, making it stable
   

@AThomas639
Please flash the latest firmware of CR-10 Smart, you can download it in official website. (https://www.creality.com/download)

Here is the video tutorial on flashing firmware: https://www.youtube.com/watch?v=qZHdCAixygg

If there is still a problem, you can turn to cs@creality.com and attach a video that clearly shows the issue.

Hi, @Ag_Back Have you installed BL-touch?
Under normal circumstances, if the leveling nuts are not moved (just the four nuts under the hot bed), the z-axis offset will not change;
you can fill your issues and attach a video in detail at this link:
https://www.creality.com/service-request.
You can also send an email to cs@creality.com and attach a video. There will be professionals to help you.

Hi, @Pottsy you can fill your issues and attach pictures or videos in this link:
https://www.creality.com/service-request. You can also send an email to cs@creality.com and attach pictures or video. There will be professionals to help you.