Posts made by Korlbrien

Its been months now since the last updated FW and still not working great. Get a new update out or just release the source code already... tired of waiting on you guys. The community will do it better and keep it up to date.

@Plucker This firmware is not working at all. Will not Flash to the motherboard at all. I held the the button for 5 min. Nothing.

I have renamed it with something short and did it with out renaming it. Still the same issue.

@Gracy Re flashed worked, used a different SD card for the screen. Only issue now is the Auto Level button is not working. Only AUX. What is the fix for this?

@DpDx i got it flashed. Aux is fine. But automatic is the only thing not working.

@Gracy Re flashed again still nothing.

@DpDx Thank you. Did all this still not working for me. The Settings button does not do anything for me. Its blank (only thing blank) and beeps when I press it. Nothing happens.

@DpDx Mind walking me through how you got it to work?

I cant seem to get mine to work. Did you rename the .bin?

@Gracy
Well this is what I'm getting when after I flash it. So not sure what to tell you. Since clearly this is a firmware issue. From what i have read, I am not the only person who has had issues with this firmware.

https://cdn.discordapp.com/attachments/329828181324464128/880620087432847390/0826211948.jpg

@Gracy Those photos are not for a CR 10 SMART. That's for tor the CR 10s PRO/PRO V2.

If the firmware does not work why release it? Only causes more issues and confusion.

@Gracy This firmware does not work. Does not take on the printer. Have done in multiple times with 5 different cards. All have been formatted and followed the video.

https://cdn.discordapp.com/attachments/329828181324464128/880620087432847390/0826211948.jpg

@admin This firmware still does not work. Doesn't even take.

https://cdn.discordapp.com/attachments/329828181324464128/880620087432847390/0826211948.jpg

@goombah88 How did you get the firmware to work? Mine is not taking.

Does the Auto Bed level work yet?

@DpDx Ever get this to work?

I cant seem to get the printer to flash properly either. The solution of replace the mb that was suggested is just asinine.

I know what the last one is, and I know what DWIN_SET is for.

What about the first two? When are they supposed to go? Where are they supposed to be installed?

I am seeing lots of people saying their AUTO BED LEVEL is not working. So I dont see a point to even trying to update to this new firmware if its not working.

@Gracy Hello, yes it is firmware issue. When I run the supposed bed level on the printer and then slice a model its not taking the the mesh that is being developed from the ABL. Even with Gcode its not retrieving it. Something is preventing it from accepting the mesh, if there even is one.

This has been a glaring issue for this printer and I'm not the only user. I have seen a lot of users who have not be able to get their bed levels mesh to take not matter what "fix" the team at creality comes out with. That "new" firmware from last month is not doing the job, the bed level issue is still there.

Quiet frankly, the fact that when I do reach out out to the creality team they tell me to so this trick or try this jerry rig fix, or its a temperature issue, some excuse when the issue is not the the users, its the printers key feature is not working. I am wholeheartedly tired of reaching out to creality support when nothing they tell me to do is working. So unless I'm wrong and if there is a user who has theirs working. Please chime in and share how its working for you.

@Gracy So if you have video proof that this bed level works that will be nice and share how you all are getting to work. AND NOT USE THE CREALITY CLOUD.

When I test my bed level..
-I run the bed level test
-I run a print test the covers all around the bed for with the model having a skirt and check to so see if the bed test print is sticking.
-I run temperature towers on all my spools of filament.

Where is the newer Firmware? Still the same one on the web page and that is not working for the bed level at all.

Anyone get the bed level working on this printer? No matter what I do this bed level is not taking and keep getting stupid suggestions/advise from Creality to double check my bed from being bent or use washers, this defeats the purpose of the ABL.

Updated firmware on the printer and screen.