I have the CP-01 and I want to use the Laser and CNC functions. Can anyone recommend a source of how to use the Creality Workshop software and/or an alternate way of working. I find the Documentation very poor. Getting the right sizing, travel speeds, locating and use very confusing.
Posts made by malbond
Poor Laser and CNC Detail - Creality Workshop
CR-01 Manufacturing Fault from New
I have a CP-01 3 in 1 machine from new.
The plastic extrusion head works fine.
However, from new the Laser and CNC heads do not work.
On inspection those 2 heads are using Pin 6 and 11 of the 15 way plug.
Pin 11 has no connection inside the machine.
Pin 6 is used by the thermostat.
So, the heads are not compatible with this machine.
There are 2 solutions.
You supply compatible laser and CNC heads.
Or, you supply workable wiring diagram so I can connect the heads.