@cokeeffekt ah! Thanks, that was the missing link!
MaxS
@MaxS
Best posts made by MaxS
Latest posts made by MaxS
-
RE: how am I supposed to use the flexible bed?
-
how am I supposed to use the flexible bed?
I bought the flexible bed add-on in the Kickstarter. It doesn't fit the bed holder at all (too slim). It has double sided tape on it. Am I supposed to glue it somewhere? What's the point in it's flexibility then? And where?
I have the feeling I didn't get the point are wasn't sent the product matching my printer...
Any insights ? -
RE: Filament sensor stopping the print
Thanks, this was almost more information than I wanted
-
Filament sensor stopping the print
It happened now for several times that the filament sensor stopped my print with still half a roll of filament left. I can resume the print without problems, but it is kind of annoying.
Does someone have an idea what could be causing this? -
RE: CR-6 SE autolevel keeps pressing printhead in the middle
@Kohen said in CR-6 SE autolevel keeps pressing printhead in the middle:
My CR6-SE has some trouble.
When trying to autolevel it moves the x and y properly.
Then it moves to the middle of the bed and start to lower the printheadThe sensor on the left (lamp) turns off and the head still keeps going down
Then it presses on the headbed and keeps pushing till you turn off the power...Even if I remove the plate it still keeps going on and on.
Turing the CR6-SE on
And placing a metal piece between the sensor on the left the led turns off
When pressing on the printhead a blue led turns on in the head.Everything seems to work but why is it failing. Can't start any print because it keeps pressing in the middle of the headbed.
Anyone?!
I have exactly the same problem as it seems. I also see a blue light appearing each time I put something against?the nozzle. Can we please get super here?
-
RE: CR-6 SE autolevel keeps pressing printhead in the middle
I have the same issue with my printer. What can I do to find out the broken part?
Should the LED be switched on during auto-leveling? What is the leveling based on?
Which parts could affect there leveling and how can I test them?