@TT2 Hello TT2, do you have any recommendations on where I can learn about printing orientation in relation to using minimal supports?
Best posts made by mrmillmill
Latest posts made by mrmillmill
Test print failed
My first print failed at about 75% on the creality cr-10 s pro. I just got it about a month ago and this was my first print. I was using pla and all settings were set for pla in cura and on file and printer. I started to hear a consistent click from the printer while I was in the other room then noticed the failure. The printer was still pushing pla out of the nozzle but the pattern the print head was making was off and not aligned with print. I could not tell if the entire print moved thiugh. The print seemed like it was stuck to the bed well enough.
RE: Beginner Help
@cherrykaleb I noticed when file names are too long they do not show up on the printer even though the files exist on the sd card. Try giving the file a name that is only 5 letters or so. I have not tested how many letters are needed in the name before the file is not displayed on the printer but will test. What did you find out about the sd card at this point?