@ncbob Hi ncbob, could I ask you if you can provide the firmware that you compiled which is also calibrated ? It would be really helpful... As I had also a few issues when I did few prints with different filaments as when I was slicing with different temperature settings or speed, on the printer wasn't changing and I had always to change them from the printer itself. Also I didn't know that the settings were getting discarded after you were turning the printer off.
I would try to do the firmware but I'm not skilled on that aspect...
Thanks

@ncbob sorry, my bad, now I saw that you posted the firmware.. I'm using my phone and I didn't saw it
Thanks for the upload !

Hi guys,

I wanted to ask if someone else has this issue, when starting a printing, the fan that cools the filament won't start or if it starts, it stops by itself and i need to manually turn it off and on from the touch screen in order to start to work properly.

Thanks

@ncbob sorry, my bad, now I saw that you posted the firmware.. I'm using my phone and I didn't saw it
Thanks for the upload !

@ncbob Hi ncbob, could I ask you if you can provide the firmware that you compiled which is also calibrated ? It would be really helpful... As I had also a few issues when I did few prints with different filaments as when I was slicing with different temperature settings or speed, on the printer wasn't changing and I had always to change them from the printer itself. Also I didn't know that the settings were getting discarded after you were turning the printer off.
I would try to do the firmware but I'm not skilled on that aspect...
Thanks

Hi guys,

I want to ask if also someone has trouble adding Cura profiles for the CR6 SE after after adding the profile of the printer in Cura.

As i'm able to add the printer following the above steps, but when i'm trying to add print profiles, it says that it's added but it doesn't show anything.

Thank you

Hi,

I would like to ask if anybody knows if there are somewhere designs of the plastic of the Y switch that holds it on the side and screws on the stepper motor ?

As mine arrived cracked and broken and the Y switch was hanging as both the screw bases were broken... I managed somehow to glue it and put one screw but i don't know for how long it will hold.

I was wondering if someone had made an stl file of that so i can print a replacement part as i cant find anywhere for it and i have send an email to creality support and nobody has responded to me.

I'm also attaching some photos if anyone can help as i'm not adept in 3D designing parts as now i'm getting started and it will take me alot of time to create the replacement part.

Thanks