There is a function to resume printing after power failure on the WiFi Box?
Posts made by PDD
RE: WiFi Box do not connect to wifi after update
Solved!!!! I entered in the logs (from the SD card) - in httpclient.log. It seems that is has a MQTT connection. But also, from there i find the files needet for update: http://file2-cdn.creality.com/model/cfg/box/V1.01b36/cxsw_update.tar.bz2
Downloaded them, writing on the SD card, inserted then power in up the WiFi Box. The next challenge was to change the status from the phone app (keep showing me "Updating") with no possibility to delete the wifi box or anything else. After a few tries, i figure out.
WiFi Box do not connect to wifi after update
Yesterday, from the android phone app, i receive a msg. that i can update the firmware of the wifi box. I started the proccess, and wait.
Until now (after >12hours) from the app, i see the same info: the wifi box is updating. I reset (power off) the wifi box, the yellow led is blinking fast and the green led (3rd) is on, but from the phone app i see the same info: the wifi box is updating.
What should i do?
(wifi network is on, internet speed is good).