Problem Solved.

Occam's Razor....back to basics. Turns out, my bed became unlevel all of a sudden. Levelled it and voila.

btw....occams razor...spock said it best. Once you eliminate to most probable, whatever is left, however improbable, must be the answer.

ok, so I tried 205 and 60...no go. Then I tried a different PLA...no go. I'm convinced it's the stl file. If someone else wants to try then here you go. Sorry, I can't upload

@admin I'm not sure what that means. That's my filament...yes

Hi there. Ender 3. Has anyone had adhesion problems on the bed. I bought some violet PLA. Using 220 & 60 and the edges of the brim won't stick and the part curls. I tried 230 & 70 and same problem.

What's my next step?

I'm wondering if it's the PLA itself because other jobs have come out awesome.

Hi all. Brand new here and to 3d printing....Ender 3.

I'm experimenting with fusion 360 but what i want now is a hand held 3d scanner to scan objects to an stl file and bring them into slicer.

Under $300. Any suggestions? I see them from 200 to $34000 but not alot of details.