The bl touch one is the same as the one from last year even though it is marked as marlin 2.0.1 (note that fw version has not changed...) and the endstop one cannot be downloaded....
Professionalism.....

Hi I just had the same issue some days ago and this had drive me completly crazy I past days to find out what's going on, I found out that it was the 2 screws that holds the hot end that were loose :
https://3dprintbeginner.com/wp-content/uploads/2021/03/Creality-Ender-6-Review-Hotend-assembly-1-1024x682.jpg.webp
Hope it help

Hi All
I got an ender 6 since some weeks and I can't get rid of stringing issues....
I have tried a lot of things like :

• moving the extruder position to be nearer of the head
• unmounting and greasing it
• calibrate extruder
• check filament temperature
• check nozzle (even try mounting an NF head instead but result was worse than stock one, don't know what i've done wrong)
• checking belt tension
• playing with retraction speed,length, travel speed...

but no real improvement, I still have a lot a stringing, more or less depending of retraction settings, but what is definitily weird is that i have far more on only 1 side:

sorry for image quality my cell camear is not really good

some extra info:

• using PLA
• using cura 4.9.1 with modified ender 5 profile (but got same result using creality version)
• speed:150mm/s
• travel speed:300mm
• retraction speed 30mm/s
• retraction length:8mm
• no z-hop

thanks in advance