I found the problem, I carefully opened everything I could to access ALL cables connected by the factory, and NOT the one in the manual that I had to connect myself. After firmly reseating all the factory installed cabling the printer works fine. Well it works, not what I consider in line with the kickstarter but its running for now. To repeat the problem was the factory installed cables, not a customer problem, either its poor quality control process or the fact you you poor fitting connectors throughout the machine which work lose during shipping. This can cause repeatable or intermittent failures and even present a fire hazard. From my experience I can not recommend Creality products to anyone. No customer should ever be endangered or be required to fix a product if it was properly manufactured in the first place.