I sent an email to email@example.com as you suggested but had no reply as yet.
Are you able to get someone to reply?
I don't seem to be getting any help from the company I bought it from.
Feeling a bit frustrated.
Best posts made by sturner07
Latest posts made by sturner07
RE: CP-01 Print filament stops feeding
I have tested the extrusion motor on the X axis cable and it works ok no problem.
I marked the end of the extrusion motor shaft so I could see more clearly if it is turning.
What happens is the motor starts turning ok for around 5 minutes then becomes intermittent in rotation and then fails to turn altogether.
It would appear that the motor driver is failing after around 5 minutes of operation.
CP-01 Print filament stops feeding
Hi any help would be appreciated.
Have assembled a new CP-01 and trying to 3D print. The print starts out fine and puts a base on the bed but then gets to around 3% and the filament stops feeding.
The G-code keeps working fine but no filament.
I have checked the head and looks mechanically ok i.e. the pinion is secure on the motor and plenty of tension on the filament.
This happens on both the sample G-code and G-code I generate with slicer.