Can someone give me the correct profile settings for Ultimaker Cura for the CR-200B?

Also, no matter what I do, I can not get the printer the print in the center of the field.
Facing the printer, it tries to print near left corner and off the glass.

Any help would be a great help/

Ultimaker Cura 4.4.1
FreeCad 0.18.4
Linux Mint 20 x64 bit

Can someone give me the correct profile settings for Ultimaker Cura for the CR-200B?

Also, no matter what I do, I can not get the printer the print in the center of the field.
Facing the printer, it tries to print near left corner and off the glass.

Any help would be a great help/

Ultimaker Cura 4.4.1
FreeCad 0.18.4
Linux Mint 20 x64 bit

I need the proper settings to load into Ultimaker Cura for this printer.
Nothing I do will make it print in the center.

Printer Setting:
X - 200
Y - 200
Z - 200
Build plate - Rectangular
Origin at center - X
Heated bed - X
Gcode Flavor - Marlin

Printhead Settings:
X min - -20
Y min - -10
X max - 10
Y max - 10
Gantry Height - 200mm
Number of extruders - 1

Start G-code:
M82 ;absolute extrusion mode
M201 X500.00 Y500.00 Z100.00 E5000.00 ;Setup machine max acceleration
M203 X500.00 Y500.00 Z10.00 E50.00 ;Setup machine max feedrate
M204 P500.00 R1000.00 T500.00 ;Setup Print/Retract/Travel acceleration
M205 X8.00 Y8.00 Z0.40 E5.00 ;Setup Jerk
M220 S100 ;Reset Feedrate
M221 S100 ;Reset Flowrate
G28 ;Home
G92 E0 ;Reset Extruder

Stop G-code:
G91 ;Relative positioning
G1 E-1 F300 ;Retract a bit
G1 E-1 Z0.2 F2400 ;Retract and raise Z
G1 X5 Y5 F3000 ;Wipe out
G1 Z10 ;Raise Z more
G90 ;Absolute positioning
G1 X0 Y0 ;Present print
M104 S0 ;Turn-off hotend
M106 S0 ;Turn-off fan
M107 ;Turn-off fan
M140 S0 ;Turn-off bed
M84 X Y E ;Disable all steppers but Z
M82 ;absolute extrusion mode used to override G91

Extruder 1:

Nozzle - 0.4mm
Com Mat Dia - 1.75