So with the issue that arose from the cr6se machine and the issues they have had from kickstarter you feel its ironic that if beta testers was on board before kickstart launch to flag these issues up would have same time, money and stress.
Best posts made by TAZMANUK
Latest posts made by TAZMANUK
RE: Apply for Beta Testing
RE: Firmware Mishap
their is new firmware for the 4.2.7 that was released 14th November 2020 2 variants download the one that says no adapter card
RE: Bad quality problem.
@alibulat thats not normal have you tried the other test prints that are on the sd card like the cat
Upgrade Kits for Ender 3 Pro
On a live stream they was showing us a Ender 3 pro to Ender 3 v2 upgrade kits which would have a silent board a bl touch and a ender 3 v2 lcd screen so that a ender 3 pro can be upgraded to a ender 3 v2.
I asked if the ender 3 v2 LCD screen was going to be available as a separate kit as i already have a 4.2.7 silent board and do not want a bl touch as this moment in time.
They said the kits was going to be available but i don't see any of these kits.
Also i asked one the live stream if you was going to do a silent fan kit for the ender 3 pro which i was told to email Jelly, I emailed Jelly and she sent me a an attachment of some silent fans which would be again available soon, again these are not available and would like to know when they will become available.
Apply for Beta Testing
I have asked many times on live stream, facebook messanger and via email to beta test printers for you and i have 25 years experience in beta testing and test for a few companies and we have a goof working relationship in making a better product and finding bugs and issues that can be addressed.
Its paramount to have hardware and software tested, however you seem to just pass these products to youtubers which just unbox, assemble and give their thoughts and because they have a large fan and viewer base.
You should send units to beta testers or have a special section in which their is a beta testing area to you can allow people to apply to beta test provided they fit the criteria, also within that beta area you send tasks to do so it can be carried out, also beta testers would also try to find issues themselves and also give ideas on how to make the product better. This could be from packaging, manual, accessories, firmware features, hardware.
I hope you can feed this back and you can always get in touch with me as i have asked multiple times.
RE: 4.2.7 Silent Board Micro SD Card Slot
@admin i understand that its just within this slot would wear out, i have a workaround well 2 in fact and thats to use the micro sd to sd adapter and insert the card then turn on the printer.
or using another marlin software builld which is marlin 2.01 bugfix 2020-11-13 as this has a feature in which you can remove the sd card by selecting change media.
i do hope creality can include these features into their future firmware builds to overcome these issues.
RE: New Firmware update 14th November
So say i have the 4.2.7 without bl touch for my ender 3 pro i need to download the one that says
4.2.7 Ender-3 pro 32bit Marlin2.0.1 BLtouch V1.1.2without adapter board TMC2225.rar
is that correct and is this marlin 2.0 bug fix and what revisions have been made in this new firmware
4.2.7 Silent Board Micro SD Card Slot
I purchased a creality 4.2.7 Silent Board which has 1.0.1 firmware on the board.
I don't want to wear out the micro sd card slot so I purchased a micro sd to sd adapter.
Here is the issue and unsure if its due to the firmware as I have tested the micro sd card adapter on a laptop and also the sd card and both are working correctly.
So once I insert the micro SD card adapter into the ender 3 pros micro sd card slot on the main screen it says card inserted even though a sd card isn't inserted in the other end of the adapter, when I insert a sd card into the adapter end and go into the menu is says no tf card inserted and their is no init card option either.
When I take out the micro sd card adapter and leave the sc card in the adapter and reinsert the micro sd card adapter again it will then say sd card insert and on the menu it will then say print from tf.
Which defeats the object as I won't to stop inserting and reinserting the micro sd card adapter end specially if if its under a 3d printed housing.
Is it due to firmware restrictions from creality, I do understand the board has registered something been clicked inside the micro sd which results in card inserted on main screen, but can't understand why if I then insert a sd card at the adapter end then go into menu it says no tf card, only if I uninsert the micro sd adapter and reinsert will print from tf show up.
Only other possible work around is put whatever I need on the sd card insert it into the sd card adapter and then turn on the printer to see if it print from tf card shows up.