I have a Falcon A1 10w laser. I have the Creality Falcon Software version 1.9.5. I do not see a place for adjusting the offset of the X and Y axis so that the position of the image on the screen matches where the machine cuts. Previous software version had a place for making this adjustment which is important so that where you position something with the camera match where the machine goes. Am I missing something or have they drop this setting?
I found the setting. In the software version 1.9.6 there are a few setting which are hidden or you just need to know how to find them. To adjust the X and Y so the image from the camera matches the engraving area correctly, like centering an image on a part so it engraves in the center, click the down arrow to the right of the camera icon, and click Camera Control. This is were you put in offsets so the camera and the part match.
Yes, the camera settings unfortunately changed a lot multiple times since they were introduced, thanks for pointing out where it is now.