From 200mm/sec to only about 45mm/sec the Higher (Z_Axis) on the Print

For_Ward · February 1, 2026, 2:12am

Hey There,

I have a K1C (2024) and for some reason with the newer Creality Print source code, I am receiving a slow print.

I have it set to 200mm/sec and it does fine at first but then it slows down tremendously, i.e. about 45mm/sec.

What do you think the issue could be now? I mean…I set the travel speed to 500mm/sec and then the printing of the filament to 200mm/sec.

Update

The reason I bring it up: It is taking 12 hours instead of a simple five hour print.

Here is the file.

simple wall mount bracket

For_Ward · February 11, 2026, 4:56am

odd setting I initiated to get particulars down pat. Anyway. All is well now.