creality print (6.2.1.3044)
win10 to printer by usb flash (gcode)
creality hi (1.1.0.48)
cfs1(1.1.3)
cfs2(1.1.3)
cfs3(1.1.3)
cfs4(1.1.3)
(cfs - edit - creality - pla - crpla/crsilk 190° - 240° pressure advance 0.04mm)
problem:
when cfs loading filament by gcode, it feed filament too hard whith no reaction on buffers end switch, so cfs red led blinks twise/sec (motor overcurrent protection indication🤔),
sometimes at this moment cfs feeding wheel make wierd noise and eat filament, then stop printing (printing without filament error), after resuming print, it has lost layers…
if i paused printing and unload/load another color from printer menu (manually, not by gcode), it works perfectly - it feed filament untill buffers endswitch
tryed it on different cfs, the same problem…