SO, 3 months in and I’m still Stoked and printing like a BOSS I will say the only issue I had was between the Keyboard and the Floor initially. The first prints were spectacular. I was blown away with the speed and quality this thing was putting out , compared to my CR’3Pro’s , 5-Pros, & S1 pro. The biggest thing after 60 days was the CFS numbers were High and prints started to slip and I got an error, about the extruder …Yda Yada,
I found a piece of filament in the CFS little window on the bottom. , I printed the Desiccant holder for the Back of the Unit and the trays for the little beads. I ordered a jug on Amazon. I also have two S1 Sunlu dryers I printed the Perforated containers for those too. Now my numbers after about 40 minutes may be in the teens 17% RH and 28/30 C printing like a champ. I would recommend everyone print the thing and add it, those tray inserts and screen tops make changing it a no-fuss situation. Creality should have made it have a dryer mode.. I want to see some Dryer mode Hacks for the CFS would be Great! that is the only short comming of this system IMO. , I’m using a splitter for the external Spool and a Sunlu S1 dryer feeding it. 5 Flavors on TAP ready to GO.
Hello, I started my journey into 3D printing in 2022 with a very reliable Creality Ender 3 S1 Pro. I was about to buy a Creality K1C, but I learned about the release of the Creality K2 Pro, so I waited, now I have the K2 Pro Combo, and I’m loving the printer, What a big jump in quality, speed, and features from my first printer. Regarding the CFS, I did the same, printed out two trays, and bought silica pellets from Amazon, I do have a Space Pi dryer, also. I’m sure Creality is already testing a new CFS with drying capacity, it will possibly be called CFS 2, CFS Pro, or CFS Plus. Hopefully it will be launched next year. As soon as it is available, I’ll sell my CFS and the Space Pi.
So mine started on my B-day in April back in 2021 ,my first Wire frame print on the Creality Ender 3 Pro, I upfitted with BTT Display and MoBo. I never looked Back, another Ender 5Pro, same scenario…added another DD Ender 3 pro (TPU) and then the S1 for carbon fiber. You can see the progression in my videos. 5 years later and 5 printers later.. I’m still a Creality FAN-MAN
Like my Ford and My Pop’s ford…They always treated us well. Creality Printers the Same… They always work for me and I have had little or no issue’s that were anything product related , Usually the issue is between the Keyboard and the Floor.
Nothing in those days came close for me to this level of Quality albeit SLOOOoooW by today’s date. I tell folks Get one if you have an Issue or a problem Send it back, because the chance of getting a second bad one was .0000001. You won’t be disappointed, like @5:22 in the video laying down smooth lines.
I will say the only issue I had was between the Keyboard and the Floor 
initially. The first prints were spectacular. I was blown away with the speed and quality this thing was putting out , compared to my CR’3Pro’s , 5-Pros, & S1 pro. The biggest thing after 60 days was the CFS numbers were High and prints started to slip and I got an error, about the extruder …Yda Yada,
PJ 
