After printing started, the screen popped up 506 AI LiDAR calibration failed
Cause analysis
1.There are foreign objects or damaged wrinkles on the calibration sticker
2.The surface of the AI module lens is not clean
3.The height difference between the calibration plate plane and the hot bed platform on the same horizontal plane is large
The AI lidar itself is abnormal
3.Troubleshooting and solution
1.Clean or replace calibration stickers
2.Clean the surface of the AI module lens
3.Adjust the height of the calibration plate
4.Replace the AI module
If you need to replace the AI module, please contact the official after-sales service.