Laser module for ender 3 v2

Hi can anyone give me the factory settings because i have modified my setting without making a backup the setting below makes the head fly of the back of the build plate so if anyone who has there Ender 3 v 2 laser module working and homing into the bottom left corner can copy and paste there settings so i can update them on mine to get this working again, its the 10w version and any of that model type should work the setting came from the console of Lightburn and using the $$ to get them to show up so anyone out there could help me many thanks

$0=10
$1=250
$2=0
$3=4
$4=0
$5=0
$6=0
$10=1
$11=0.010
$12=0.002
$13=0
$20=0
$21=0
$22=1
$23=3
$24=1500.000
$25=4500.000
$26=20
$27=3.000
$30=1000.000
$31=0.000
$32=1
$100=80.000
$101=80.000
$110=10000.000
$111=10000.000
$120=500.000
$121=500.000
$130=400.000
$131=415.000