My Ender 3 V3 SE’s auto bed leveling is setting the nozzle too high off of the bed plate and getting terrible bed plate adheason, (even with the original bed plate, I know so crazy) and I had to manually lower the nozzle from -.18 Z Offset to -.27 to get good bed plate adhesion for PLA at 60C. Now that is a big drop, and I was wondering if someone could help me fix my auto leveling, but my printer is currently working reliably (for now.) Thanks for your help.
Don’t know that there is a fix but both my V3SE and V3KE have to lower the nozzle by 0.1/0.15 to get the right z-offset. I just put it down to the autolevel is close but just needs a little extra. I turn off the autocheck on every print so that it doesn’t overwrite the new z-offset value. I’ve not had to relevel the printer in months, once it is set it is set.
I have also encountered the same problem before. After turning off the automatic leveling, I contacted the after-sales service to adjust it. It is still recommended to contact customer service, who are more professional