Post processor for Vectric?

Creality Ecosystem Creality Falcon
1

Does anyone know what to use as a post processor in vectric vcarve/aspire? I have the Falcon 60.

2

Hi, I have the Falcon 10W and trying to get my head around the Creality sample files so I can modify a PP from Vectric. I can’t find anything that tells me about what the codes actually do for bounding box and program start.

Did you figure this out?

Do you have any info that you will share please?

Thanks

Jim

3

It’s normal GRBL flavor of GCODE that the Falcon lasers use.
Especially the Falcon 10W (open frame 10W, not the A1) is older than Creality’s own software, it was initially intended to be used with LaserGRBL or the GCODE version of Lightburn so there’s nothing really device specific.

4

Thank you for the reply Sebastian.

I’ve spent most of today trying to figure this out.

I was a CNC turner for 25 years and wrote all of my own programs and now own a CNC router running Mach3 but without any data regarding the running of this laser and syntax used I’m struggling.

Do you have any information sheets that I could refer to as I’m just “thrashing around in the dark” at the moment.

Thanks.

Jim

5

Something like this:

and

?
I think the Falcon 10W has no special commands besides this, it would be way more complicated with the A1 Pro and its auto focus etc.