After assembling and programming the 3D creality CR10SE and printing a test print, I had the octopus printed. When setting the print in simplify 3d, the print is shifted all the way to the right on the edge of the print surface. After moving the X-axis all the way to the left, it still pushes all the way to the right. My question is what am I doing wrong?
Check that the home position is set correctly in your slicer, it can usually be changed between 0,0 or centre of the bed. Try altering the setting to see which works best for you.
I changed the settings from right to left successively several times, it shows the corresponding position in the slicer, but it always pushes completely to the right
I would recommend installing and testing with Creality Print. Creality Print will be configured to work correctly with your machine and should be able to confirm whether there is something mis-configured in Simplify 3D.