Hello, I am new to 3d printing, and I am not able to get my creatality cr 10s nozzle to meet the bed when starting the print.
before starting I did the paper thickness underneath nozzle on corners, and it was good. then when I started the print, it made the test line on the side closest to home but then when it when to the middle for the real print the nozzle was lifted up too much and wouldn’t allow the filament to get close enough to the bed for it to stick. I dont know how to trouble shoot this and ive looked up lots of different things to try but none have worked.
Also maybe i should mention i bought a replacement hot end and extruder because the original one was leaking. i thought it might be that but shouldn’t there be a way to adjust for that?