Your Object just finished. No layer shift, printed with the following settings:
- PETG at Nozzle 222° Bed 72°.
- Layer .2mm.
- Infill 10% Gyroid.
- 2 Wall Loops.
- 2 Top & Bottom shell layers Monotonic pattern.
- Outer Brim.
Since I used my profile for “Fast printing” Quality is not the best specially on letters and where walls are to tight to pure the infill, that can be avoided adding another wall instead of infill. You can see in the last photos of the video Below that it looks as Overextrusion and the Letters with Ghosting.
And this is the timelapse: