Why are there Ender 3 V3 SE/KE questions in the Ender 3 V3/Plus- https://forum.creality.com/c/ender-3-v3/13 area when they have subforums in Ender Series - Creality Community Forum
My Ender 3 Pro V3 SE Keeps messing up on horizontal surfaces as shown:
I’ve noticed it tends to mess up more using the Creality Print, so I’m trying the Creality Slicer, which is not my preferred opton (1H 11M vs 36H 13M)The prints are basically trash, I’ll update this post when the new print is done.
This is what it looks like using the old slicer come much better overall:
I do not believe the printer is causing this problem come it looks more like a slicer issue with crealty print. The print took 1 day 11 hours and 30 minutes,do about this it would help a lot if we could upload the *.stl files . Who are the moderators on this forum and who are the admins? How do we contact them?
There are 2 things to fix this. First is flowrate, the later creality print versions seem to overextrude but the other thing is that the stepper motors default current of 0.6a should be 0.75/0.8a since changing that value on the x and y stepper the prints have gone back to being awesome. I don’t know how to this on Marlin as I have converted my V3SE to Klipper via a Sonic Pad.
I have no idea who the moderators or admin are, I am just a print user like you imparting my experience.
Is there a way to increase the clamp force on the feed? I’m wondering if it is slipping in this feed mechanism. I do know it is very frustrating printer went from not printing anything correctly to printing correctly after making one print with a high quality mode.
If you remove the printer head cover there is an adjustment screw on the right hand side for adjusting the extruder.
1 Like