Z Axis offsetting on the Pro

[MyKindaStore]

This works with the K2 Pro.

Just finished adding this with more filament. Dialed in the first layers.

Perfection!

How to set Z-Offset based on used build plate and filament with simple klipper macro

Wanted to share again some of ‘tools’ I use when printing with K2 (this macro with other values I use also on other printers). I had to change my nozzle because after 500+ hours of printing with it it was starting to clog every 2nd print, even with some PLA and always with PETG. After replacing the nozzle and running all printer calibration I realized that I need to increase my Z-Offset by +0.02 mm now because even PLA was pushed too much into print plate. On top of that I bought a 3rd party …